• 3 WEEK SHIPMENT

View Tech Drawings

PRESSURE ROLLERS:  1-3/8" dia. x 18 ga. galvanized steel, model 138G w/ 5/16" hex.

RETURN ROLLERS:  1-3/8" dia. x 18 ga. galvanized steel, model 138G w/ 5/16" hex, adjustable.

BELTING:  2-1/4" wide "high strength" PVC-150 belt.

CENTER DRIVE:  Reversible drive with 24" integral belt take-up.

DRIVE PULLEY:  4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

SPEED: 60 FPM, constant.

BEARINGS:  All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings..

BED:  6" x 1-1/2" x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.

FLOOR SUPPORTS:  SM-6 adjustable 30-1/2" to 42-1/2" TOR. Supports should be lagged to floor.

SQUARING RODS:  Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.

MOTOR DRIVE:  1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN:  Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

ELECTRICAL CONTROLS:  Optional.